Showing 1 - 20 out of 37
Year: 1997
Precision THT/PTH lead cutting machine Equipped with twin high-speed disk blades, brushes and shaving collection drawer Dimensions / weight: 1.72x0.9m H1.55m / 350kg Electrical connection: 230V - 50/60Hz Maximum energy absorption: 1400W PCB processing speed: 0 to 6 m/min PCB dimensions supported: 20 to 350mm in width, up to 320mm in length Maximum lead length processable: 22mm Blades rotation speed: …Year:
High speed Automatic Wire Bonder Highly productive and always aiming for zero defects: the fully automatic, compact wire bonder SPRINT-T 01 was adapted to the special requirements of mass production of power semiconductors and power modules in the automotive industry.Year: 2021
Fluoroplastic fluid heater for 4TEX TFBM semi conductor from 2021 Perfect condition. Date 2021. Capacity: 5L/min. Delivered with 3Kw I2R heater. process : pmax 3Bar / Tmax 70°C cooling : pmax 3Bar / Tmax 15-30°C The I2R chemical heater from 4TEX is one of the first induction inline heating systems for ultrapure fluids. The combination of the approved method based …Year: 2009
spin processor EDC-650-15B from 2009 Good working condition. Comes with its control and manual. Very little used: counter: 3454. Exact model: EDC-650Hz-15NPP/IND The EDC-650-15 spin processor is a compact model with advanced features. It can process wafers up to 300mm diameter and 9" × 9" (229mm × 229mm) substrates, although it has a max. rotational speed of 12,000 rpm and …Year: 2006
Camalot Xyflexpro+ Dispenser Year 10/2006 620 Pump Laser Height Sensor Left to Right Pass Thru Conveyor Dispense Area: 22 x 22 Vision System Windows XP Operating System Power Voltage: 220V - 50/60 HZ CE Marked Machine Dimensions: 50 x 56.7 x 60.2 inches Machine Weight: 2,425 lbs.Year:
Camalot Model Number: 7200-3 Windows XP Operating System 620 Pump Laser Height Sensor Left to Right Pass Thru Conveyor Dispense Area: 22 x 22 Vision System Power: 220 Volt - 50/60 HZ - 20 AMPS - CE Marked Machine Dimensions: 50" x 56.7" x 60.2" Machine Weight: 2,425 lbs. Complete in Good Working ConditionYear:
used/working good conditiomYear: 2010
used/working good conditionYear:
Despatch TDF2-52-1E Bake Oven Brand: Despatch Model: TFD2-52-1E Max Operating Temperature: 343C (650F) F.A. DUCT 7.00" DIA EXH. DUCT: 2.50" x 13.5" F.A. Damper Blade Cut to: 1.38" DIA Holes 2X EXH. Damper Blade Cut to: 11.25LG Minimum purge time required: 5 minutes Type of Solvent: MEX OR EQUAL Max amount allowed: 0.15 GPH @ 400F Heater Type: Electric Heater …Year: 2000
Interoperational system for the SMT line, which includes: 1. Romel Desaker 2. 2 x Transport 1m 3. 2 x Transport 50cm 4. Fuji buffer Possibility to purchase the entire line, which includes the DEK 265 Infinity printer, the Siplace HS60 SMT machine, the Siplace HF3 SMT machine, the MyReflow 7038 oven, the interoperational transport system and a set of feeders …Year: 2012
PVA 650 Conformal Coating Machine (2012) Brand: PVA Model: 650 Year: 2012 Type: Conformal Coating Machine Options: Motion Axes: 3 Controller Axes: 4 Controller: 2000 X-Stroke: 500mm Y-Stroke: 500mm Z-Stroke: 90mm Head 1: Valve: FCM100 Atom Air range: 0-5 PSI O-ring material: KALREZ Conveyor: Type: SMT Belt Direction (Lto R, R to L): Left to Right Conveyor height: 37-38” Laser …Year: 2015
Complete automated cell with conveyor system for SMT PCB panel applications. Equipped with an adjustable width conveyor for PCB panels. Label printer and applicator: CAB Hermes A4L. With a few working hours, the cell is clean and fully operational.Year: 1994
Production of cable bundles (core bundles). Printing of connectors, clamping with a binding gun. According to the file, it stops at the correct length, the operator prints the connector and cuts the wires and then connects the connector at the correct length (see.file below), the whole bundle is wound on the winch, where the first connector is connected to the …Year: 2005
NUTEK NTM720EL-2 dual magazine line loader Manufacturer: NUTEK Model: NTM720EL-2 Vintage: 2005 SN: 2005-0042C01 Type: Dual magazine line loader (Beginning of line) Size: L Transport width: 50-410mm Weight - 400kg Voltage - 220V AC single phase Size - 142 x 164 x 130mm Air Pressure - 4-6bar SMEMA compatibleYear: 2005
NUTEK NTE0710LL Single Magazine Line Loader Brand: NUTEK Model: NTE0710LL YOM: 2005 SN: 2005-0138A02 and 2005-0138A03 (2 units available) Single Sided - or double-sided PCBs Maximum PCB Size: 457mm (L) x 407mm (W). Line Height: 950mm ±25mm. SMEMA Comms. Power: 220 Vac CE Marked Weight: 180 Kgs Automatically loads PCBs from an adjustable width Magazine (various sizes - sold separately) …Year: 1999
Fuji DSG-4200 Shuttle Gate Conveyor Model: DSG-4200 SN: 7944 Description: Shuttle Gate Volts: 120 Phase: Single Hertz: 60 Board Flow Direction: Left to Right Max PCB Width: 15.5 inches Max PCB Length: 43.5 inches Belt Track Length: 44.5 Conveyor Sections: 1 Section 1 Length: 44.5 inches Width Adjust Style: Hand Crank Maximum Width: 15.5 inches Skid Dims (LxWxH): 60" x …Year: 2008
Horizontal machine for chemical galvanic treatment / etching / micro-ammoniac etching.Year:
Scoring machine HML Machine / Weight: 1.9 x 2.0 H 1.5 m / 600 kg Electrical connection / air connection: 230V, 50/60 Hz / 6 bar Control: WIN XP Cutting speed: 0.5 to 40 m/min Positioning accuracy x u.z / y axis: ± 0.02 / 0.05 mm Jumps per scribe line: 0 to 20 Function / error: good, is ok. …Year: 2009
Parmi SPI HS60 Pattern Recognition Intelligence 3D Solder Paste Inspection HS60L Parmi Model Number: SPI HS60 Year 2009 Max PCB Size: 550 x 510 mm Min PCB Size: 50 x 50 mm Windows XP O/S Inspects Height, Area, Volume, Offset, Bridge, and all Colors, Pad F 18 x18 High frame rate camera system Easy to use with Gerber Input Power: …Year: 2009
Protec Phantasm Dispenser