Showing 1 - 20 out of 37
Year: 1994
Production of cable bundles (core bundles). Printing of connectors, clamping with a binding gun. According to the file, it stops at the correct length, the operator prints the connector and cuts the wires and then connects the connector at the correct length (see.file below), the whole bundle is wound on the winch, where the first connector is connected to the …Year: 2013
Asymtek S-910N Dispenser inline dual valve mount DJ9500 FOF : Fids-on-the-Fly™ Fids-on-the-Fly ™ high-speed fiducial capture software is up to 5.5X faster than the traditional stop-and-capture for locating fiducials and can increase UPH as much as 35 percent Pre-Dispense station Excellent condition Features and Benefits Slim design maximizes floor space utilization and lowers cost of ownership Digital vision system provides …Year: 2014
Nordson Asymtek Spectrum S-820B Single-Stage Batch Dispenser (2014) Brand: Nordson Model: Asymtek Spectrum S-820B Year: 2014 Type: Single-Stage Batch Dispenser Configured with NexJet System (NJ-7) Machine specifications: Fluidmove® for Windows® XP Software Laptop Computer Heated Vacuum Tooling Plate (350 x 350mm) Pattern Recognition System Mass Flow Calibration Light Beacon: Red, Amber, Green, Blue Needle Sensor and Purge Station Heat Control: …Year: 2013
Tile de-embedding system Bosch Rexroth Rectangular Rectangular Guides in UP class Bosch Rexroth Bolts in T3 class Mach3 control program Elte spindle 40 000 1 / min with the power of 2.2kW Heat exchanger for cooling the spindle Axis drives using servo motors Precise sensor for measuring tool length Computer to control the machine Working table area 500x375mm ER16 cutter …Year:
High speed Automatic Wire Bonder Highly productive and always aiming for zero defects: the fully automatic, compact wire bonder SPRINT-T 01 was adapted to the special requirements of mass production of power semiconductors and power modules in the automotive industry.Year: 2009
Parmi SPI HS60 Pattern Recognition Intelligence 3D Solder Paste Inspection HS60L Parmi Model Number: SPI HS60 Year 2009 Max PCB Size: 550 x 510 mm Min PCB Size: 50 x 50 mm Windows XP O/S Inspects Height, Area, Volume, Offset, Bridge, and all Colors, Pad F 18 x18 High frame rate camera system Easy to use with Gerber Input Power: …Year: 2008
IPTE Lasermarker Line consisting of the following components: BBL (Loader- to separate boards) Destacker IPTE Flexmarker FLM 406950 with the following options: CO2 Laser (overhauled) PCB width 50x460mm PCB length 50x460mm PCB Ratio 0,8 PCB weight 2,5 kg field of view 70x70mm field of marking 460x460mm Position accuracy +/- 0,1mm measurement of the system 1x1,3x1,8m EL-FLU (Flip Unit) BBU (Unloader …Year:
Scoring machine HML Machine / Weight: 1.9 x 2.0 H 1.5 m / 600 kg Electrical connection / air connection: 230V, 50/60 Hz / 6 bar Control: WIN XP Cutting speed: 0.5 to 40 m/min Positioning accuracy x u.z / y axis: ± 0.02 / 0.05 mm Jumps per scribe line: 0 to 20 Function / error: good, is ok. …Year: 2008
Horizontal machine for chemical galvanic treatment / etching / micro-ammoniac etching.Year: 2005
NUTEK NTM720EL-2 dual magazine line loader Manufacturer: NUTEK Model: NTM720EL-2 Vintage: 2005 SN: 2005-0042C01 Type: Dual magazine line loader (Beginning of line) Size: L Transport width: 50-410mm Weight - 400kg Voltage - 220V AC single phase Size - 142 x 164 x 130mm Air Pressure - 4-6bar SMEMA compatibleYear: 2005
NUTEK NTE0710LL Single Magazine Line Loader Brand: NUTEK Model: NTE0710LL YOM: 2005 SN: 2005-0138A02 and 2005-0138A03 (2 units available) Single Sided - or double-sided PCBs Maximum PCB Size: 457mm (L) x 407mm (W). Line Height: 950mm ±25mm. SMEMA Comms. Power: 220 Vac CE Marked Weight: 180 Kgs Automatically loads PCBs from an adjustable width Magazine (various sizes - sold separately) …Year: 2010
used/working good conditionYear:
used/working good conditiomYear:
Camalot Model Number: 7200-3 Windows XP Operating System 620 Pump Laser Height Sensor Left to Right Pass Thru Conveyor Dispense Area: 22 x 22 Vision System Power: 220 Volt - 50/60 HZ - 20 AMPS - CE Marked Machine Dimensions: 50" x 56.7" x 60.2" Machine Weight: 2,425 lbs. Complete in Good Working ConditionYear: 2006
Camalot Xyflexpro+ Dispenser Year 10/2006 620 Pump Laser Height Sensor Left to Right Pass Thru Conveyor Dispense Area: 22 x 22 Vision System Windows XP Operating System Power Voltage: 220V - 50/60 HZ CE Marked Machine Dimensions: 50 x 56.7 x 60.2 inches Machine Weight: 2,425 lbs.Year: 2009
Protec Phantasm DispenserYear:
Despatch TDF2-52-1E Bake Oven Brand: Despatch Model: TFD2-52-1E Max Operating Temperature: 343C (650F) F.A. DUCT 7.00" DIA EXH. DUCT: 2.50" x 13.5" F.A. Damper Blade Cut to: 1.38" DIA Holes 2X EXH. Damper Blade Cut to: 11.25LG Minimum purge time required: 5 minutes Type of Solvent: MEX OR EQUAL Max amount allowed: 0.15 GPH @ 400F Heater Type: Electric Heater …Year: 2012
PVA 650 Conformal Coating Machine (2012) Brand: PVA Model: 650 Year: 2012 Type: Conformal Coating Machine Options: Motion Axes: 3 Controller Axes: 4 Controller: 2000 X-Stroke: 500mm Y-Stroke: 500mm Z-Stroke: 90mm Head 1: Valve: FCM100 Atom Air range: 0-5 PSI O-ring material: KALREZ Conveyor: Type: SMT Belt Direction (Lto R, R to L): Left to Right Conveyor height: 37-38” Laser …Year: 1999
Fuji DSG-4200 Shuttle Gate Conveyor Model: DSG-4200 SN: 7944 Description: Shuttle Gate Volts: 120 Phase: Single Hertz: 60 Board Flow Direction: Left to Right Max PCB Width: 15.5 inches Max PCB Length: 43.5 inches Belt Track Length: 44.5 Conveyor Sections: 1 Section 1 Length: 44.5 inches Width Adjust Style: Hand Crank Maximum Width: 15.5 inches Skid Dims (LxWxH): 60" x …Year: 2011
Line Laser Marker Insignum 4000 year 2011 with INVERTER INSIDE !! (M2201RISFI01) - LSB 03 De-stacker L=612mm Mfg year 2011 Automatic width adjustment More expense for combi head 2 Equipment for ceramics per segment - INSIGNUM 4000 CO2 - Laser X/Y axle system Integrated Flip function Insignium Electric width adjustment Automatic width adjustment Adjusted transport mechanics Hardware module camera system …