Cheese draining and pre-press vat MKT Presswanne

Information
Rectangular SS draining and pre-pressing vat (draining vessel) for cheese. Drainage through the side by SS perforated plates and through the bottom by micro perforated carpet. Draining surface: 10,75 m², Total volume 6.000 liter suitable for 1.000 to 1.700kg cheese depending of height cheese blocks. Pre-pressing of the curd over the total surface controlled by 2 electric chain hoists, after pressing automatic transport of the curd by roll on the bottom carpet and automatic cutting device for blocks of cheese with push off bar and manual filling of the cheese moulds. Curd block length and width adjustable, 4 knifes included. Controls renewed in 2008 with Hitachi PLC. Including compressible end plate to adjust length of curd bed.

Manufacturer: MKT
Model: Presswanne
Capacity up to 1.000-1.700 kg curd per batch
Year 1997
Year of Revision: 2008
Weight ± 5.000 kg
Condition Good
Dimensions (LxBxH) ± 9,50 x 2,70 x 5,00 m
Location The Netherlands

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 9500.0 × 2700.0 × 5000.0
Weight 11020 lb
Worked hours
Hours under power
State in working conditions
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 87
Last activity May 30, 2023

Description

Cheese draining and pre-press vat MKT Presswanne

Information
Rectangular SS draining and pre-pressing vat (draining vessel) for cheese. Drainage through the side by SS perforated plates and through the bottom by micro perforated carpet. Draining surface: 10,75 m², Total volume 6.000 liter suitable for 1.000 to 1.700kg cheese depending of height cheese blocks. Pre-pressing of the curd over the total surface controlled by 2 electric chain hoists, after pressing automatic transport of the curd by roll on the bottom carpet and automatic cutting device for blocks of cheese with push off bar and manual filling of the cheese moulds. Curd block length and width adjustable, 4 knifes included. Controls renewed in 2008 with Hitachi PLC. Including compressible end plate to adjust length of curd bed.

Manufacturer: MKT
Model: Presswanne
Capacity up to 1.000-1.700 kg curd per batch
Year 1997
Year of Revision: 2008
Weight ± 5.000 kg
Condition Good
Dimensions (LxBxH) ± 9,50 x 2,70 x 5,00 m
Location The Netherlands

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 9500.0 × 2700.0 × 5000.0
Weight 11020 lb
Worked hours
Hours under power
State in working conditions
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 87
Last activity May 30, 2023

Here is a selection of similar machines

Cheese draining and pre-press vat MKT Presswanne